Field needs
01
13. ポータブルで簡単に位置合わせをするための周囲発光型FPD
ニーズ:タオル等で覆われて見えなくなったフラットパネルの位置を外から視認できるようにし、位置ずれ...
02
12. 高齢・難聴患者向け呼吸指示システム
ニーズ:標準の音声案内が届きにくい高齢・難聴の患者に対して、個別の聞こえ方に合わせた呼吸指示をス...
03
11. MRI担当者が院内コミュニケーションシステムから孤立しないための通信ソリューション提案
・ニーズ:MRI室内へ入る際にインカムを外すリスクを解消し、患者のそばを離れずに即座に応援要請を行...
04
10. 医療用寝台着脱式テーブル
・ニーズ:ICU患者のCT検査時に、多数の医療機器やチューブ類を寝台へ安全かつスピーディに搭載・固定...
05
9. 撮影効率向上のための全年齢対応固定システム
・ニーズ:体位保持が難しい患者の苦痛や体動による再撮影を減らし、スタッフの負担・被ばくも抑えて安...
06
14. 警告を「気づき」から「確認行動」につなげる多軸血管撮影装置安全支援技術(動画再生)
・ニーズ:機器やスタッフが密集する手術室で、Cアームの接触・衝突事故を防ぎ、操作者の安全確認行動...
07
6. アラート機能付き線量計⼀体型放射線防護眼鏡 ― 術者の⽔晶体被ばくをリアルタイムに可視化・警告する防護眼鏡 ―
・ニーズ:手技中の無自覚な水晶体被ばくを、その場でリアルタイムに把握して適切な防護行動をとりたい...
08
8. 手術支援画像作成のための Fusion(フュージョン)機能(動画再生)
・ニーズ:複雑で時間のかかる手術支援画像の作成・位置合わせ作業を自動化・簡便化し、現場で手軽かつ...
09
7. AI検像支援システムの開発 〜部位・左右誤認、患者誤認の自動検出〜(動画再生)
・ニーズ:目視検像による見落としリスクと確認負担を減らし、部位・左右の誤送信を未然に防ぎたい。 ●...
10
1. 高度3D画像処理人材の偏在を解消する医療連携プラットフォーム ― Radiation HUB 3D ―
・ニーズ:専門人材がいない施設でも、他施設と安全に連携して高度な3D手術支援画像をスムーズに入手・...
11
5. 静脈注入状態のリアルタイムモニタリングシステム
・ニーズ:造影CT検査で腕を上げると注入口が見えなくなるため、造影剤の漏れやトラブルをリアルタイム...
12
4. 汚染検査に⽤いるためのリボフラビン蛍光励起・ ガンマ線測定⼀体型システムの開発
・汚染範囲の視覚的な把握:汚染の位置と広がりを一目で直感的に特定したい。 ・迅速・確実な除染作業...
13
3. X線撮影における後付け距離(体厚)計測システム
1. 計測作業の簡便化・効率化 ・現状の課題:装置に備え付けられたスケールを目視し、斜め方向から距...
14
2. 患者可動域適応型⼀般X線ポジショニング⽀援システム(動画再生)
・医療現場・技師側のニーズ:技師の個人経験に頼る撮影判断を標準化・迅速化し、判断のばらつきと再撮...
Needs
JIRAカンファレンスパークでは、公益社団法人 日本放射線技術学会(JSRT)との協働にて【医工連携:ニーズ/シーズマッチング】サービスを開始します。
☑️ JSRT会員(医療従事者・アカデミアメンバー)の皆様へ
医療業務における「困りごと(ニーズ)」「解決したい課題」「社会実装についてアイデア」を募集しています。
- 現在使用している機器ではここまでの機能しかないが、さらにこんな機能があると利用範囲が拡がる。
- この医療行為の実施に際して、こんな専用機器が欲しい。
など「お困りごと(ニーズ)」がありましたらニーズ登録フォームより入力をお願いします。
(第1回の医工連携:臨床ニーズマッチング会に向けた臨床ニーズの募集は、9月30日で締め切っております。)
☑️ 医療機器/プログラムを開発・製品化している企業の皆様へ
医療の現場には、これからの医療業務を支援するために必要な多くのニーズや課題が存在しています。JIRAカンファレンスパークでは、公益社団法人 日本放射線技術学会(JSRT) 様と協働で、医療従事者がお持ちのニーズ・課題・アイデアを募集しました。
ここに掲載したニーズ・課題・アイデアをご覧いただき「自社が有する技術で解決できるのでは?」「自社での製品化が可能かも?」と関心を持たれましたら、JSRT秋季大会に併設で開催しますJIRAカンファレンスパーク 医工連携ニーズ発表会にご参加ください。
参加登録は、医工連携ニーズ発表会参加登録ページよりお手続きをお願いします。
注)ニーズマッチング会でのニーズ発表の順序は、発表者の状況などにより、変更することがあります。
JIRAカンファレンスパークでは、公益社団法人 日本放射線技術学会(JSRT)との協働にて【医工連携:ニーズ/シーズマッチング】サービスを開始します。
☑️ JSRT会員(医療従事者・アカデミアメンバー)の皆様へ
医療業務における「困りごと(ニーズ)」「解決したい課題」「社会実装についてアイデア」を募集しています。
- 現在使用している機器ではここまでの機能しかないが、さらにこんな機能があると利用範囲が拡がる。
- この医療行為の実施に際して、こんな専用機器が欲しい。
など「お困りごと(ニーズ)」がありましたらニーズ登録フォームより入力をお願いします。
(第1回の医工連携:臨床ニーズマッチング会に向けた臨床ニーズの募集は、9月30日で締め切っております。)
☑️ 医療機器/プログラムを開発・製品化している企業の皆様へ
医療の現場には、これからの医療業務を支援するために必要な多くのニーズや課題が存在しています。JIRAカンファレンスパークでは、公益社団法人 日本放射線技術学会(JSRT) 様と協働で、医療従事者がお持ちのニーズ・課題・アイデアを募集しました。
ここに掲載したニーズ・課題・アイデアをご覧いただき「自社が有する技術で解決できるのでは?」「自社での製品化が可能かも?」と関心を持たれましたら、JSRT秋季大会に併設で開催しますJIRAカンファレンスパーク 医工連携ニーズ発表会にご参加ください。
参加登録は、医工連携ニーズ発表会参加登録ページよりお手続きをお願いします。
注)ニーズマッチング会でのニーズ発表の順序は、発表者の状況などにより、変更することがあります。
1. A Medical Collaboration Platform to Resolve the Uneven Distribution of Advanced 3D Image Processing Personnel: Radiation HUB 3D
事務局
- Needs: Facilities without specialized personnel want to safely collaborate with other facilities to smoothly obtain and utilize advanced 3D surgical support images. ● We want to build an "Inter-facility Medical Collaboration Platform" that can perform everything from secure data sharing to creation requests, creation, return, and revision confirmation online in a single end-to-end process.
2. Patient Range-of-Motion Adaptive General X-ray Positioning Support System (Video Playback)
事務局
- Needs of medical staff and technicians: To standardize and accelerate imaging decisions that currently rely on individual technician experience, and to prevent variations in judgment and the need for retakes.
- Needs of patients: To shorten the time spent in painful positioning and minimize the burden during imaging.
● We aim to build a decision support system that, upon selecting and inputting patient physical limitations (posture, pain, range of motion, etc.), automatically suggests the 'optimal alternative imaging plan (imaging position, X-ray incident angle, placement of image receptors and auxiliary devices)' based on technician expertise.
3. Retrofitted distance (body thickness) measurement system for X-ray imaging
事務局
1. Simplification and Efficiency of Measurement Tasks
・Current Issues: Measurement tasks are cumbersome because they involve visually checking the scale attached to the device and measuring the distance from an oblique angle.
・Needs: To simplify the process of checking the imaging distance and reduce the effort and time required for imaging preparation.
2. Standardization and High Reproducibility of Measurement Results
・Current Issues: Due to visual measurement, results are prone to variation depending on the operator (technician).
・Needs: To check and reproduce the imaging distance (as well as angle and deflection) with high reproducibility and the same level of accuracy, regardless of who is in charge.
3. Easy Implementation
・Needs: To easily implement and operate the system as a retrofit to existing X-ray imaging devices without the need to replace the devices themselves.
● We aim to develop a 'distance measurement system that can be retrofitted' to existing X-ray devices, allowing anyone to easily measure the imaging distance without errors.
4. Development of an Integrated Riboflavin Fluorescence Excitation and Gamma-Ray Measurement System for Contamination Inspection
事務局
・Visual grasp of contamination range: I want to intuitively identify the location and extent of contamination at a glance.・Rapid and reliable decontamination work: I want to perform radiation intensity measurement and position visualization simultaneously to carry out decontamination and restoration of hospital rooms smoothly and without waste.● I want to develop a device that performs fluorescence imaging and radiation measurement simultaneously to "visualize" the location, extent, and intensity of contamination by superimposing them on an image.
5. Real-time monitoring system for intravenous infusion status
事務局
- Needs: Since the injection port becomes invisible when the arm is raised during contrast-enhanced CT scans, there is a need to detect and prevent contrast agent leakage or other issues in real time. ● We aim to develop a monitoring tool that uses a 'low-pressure ultrasonic sensor' worn on the arm to constantly check blood flow and automatically determine the injection status of the contrast agent (normal, poor contact, or leakage) in real time.
6. Radiation Protective Eyewear with Integrated Dosimeter and Alert Function: Protective Eyewear for Real-time Visualization and Warning of Operator Lens Exposure
事務局
- Needs: To grasp unconscious lens exposure during procedures in real-time on the spot and take appropriate protective actions. ● We want to develop a system that integrates a small radiation sensor and warning functions (LED/buzzer) into protective eyewear to measure and notify exposure doses in real-time.
7. Development of AI-Assisted Image Inspection System: Automatic Detection of Anatomical Site/Laterality Errors and Patient Misidentification (Video Playback)
事務局
- Needs: Reduce the risk of oversight and the burden of verification associated with visual image inspection, and prevent the incorrect transmission of body parts and laterality. ● We want to build an AI-based image inspection support system that automatically detects discrepancies between orders and images (body parts/laterality) before PACS transmission and notifies users with an alert.
8. Fusion function for creating surgical support images (video playback)
事務局
- Needs: Automate and simplify the complex and time-consuming task of creating and registering surgical support images to enable easy and rapid use in clinical settings. ● Incorporate "simple virtual structure creation" and "automatic registration (Fusion)" functions into the CT workstation to streamline the creation process and reduce time.
9. All-age fixation system for improving imaging efficiency
事務局
- Needs: We want to reduce patient distress and retakes caused by body movement in patients who have difficulty maintaining a position, while also reducing staff burden and radiation exposure to ensure safe imaging. ● We want to develop a 'fixation system' that uses materials that do not affect image quality, prevents body movement safely in a short time, and reduces the burden on the patient.
10. Detachable table for medical beds
事務局
- Needs: During CT scans for ICU patients, there is a need to safely and quickly mount and secure numerous medical devices and tubes onto the patient bed. ● We want to develop a "general-purpose auxiliary table" that can be attached to and detached from the CT bed and can stably hold heavy equipment and tubes.
11. Proposal for a communication solution to ensure MRI staff are not isolated from the hospital communication system
事務局
- Needs: Eliminate the risk of having to remove the intercom when entering the MRI room, and enable immediate requests for assistance without leaving the patient's side. ● We want to develop an 'MRI-compatible intercom device' that can be safely worn and used inside the MRI room, allowing for two-way communication with hospital smartphones outside the room via one-handed operation.
12. Respiratory Instruction System for Elderly and Hearing-Impaired Patients
事務局
Needs: For elderly or hearing-impaired patients who have difficulty hearing standard audio guidance, we want to smoothly convey breathing instructions tailored to their individual hearing needs to prevent examination delays and the need for re-imaging. ● We want to develop a system that combines bone conduction headphones and an application to reliably deliver remotely adjusted breathing instructions to each patient.
13. Ambient light-type FPD for portable and easy alignment
事務局
Needs: To be able to visually confirm the position of a flat panel that has been covered by towels or other items from the outside, and to reduce the burden on patients and technicians caused by retakes due to misalignment. ● We want to develop a "peripheral-emitting FPD" that illuminates the area around the panel to improve visibility, allowing for accurate and smooth positioning even through towels.
14. Multi-axis Angiography Safety Support Technology that Connects Warnings from "Awareness" to "Confirmation Actions" (Video Playback)
事務局
- Needs: In operating rooms where equipment and staff are densely packed, we want to prevent contact and collision accidents involving C-arms and reliably support the operator's safety confirmation actions. ● We want to build 'C-arm safety support technology' that detects the risk of interference with moving parts and the surrounding environment, and navigates the process from issuing alerts to checking safety confirmations.